KeraVEG Lash Lifting Set

KeraVEG is an innovative professional care system that combines the effectiveness of lamination with protection and nourishment for hair health. Thanks to a blend of vegan proteins, natural oils, and conditioning ingredients, the set not only ensures long-lasting results but also restores, strengthens, and protects lashes and brows throughout the procedure.

Action of the KeraVEG products

1. KeraSoft Lifting Serum (Product 1)
• Used at the first stage.
• Softens hairs, making them elastic and manageable.
• Facilitates shaping into a new form.
• Vegan protein, jojoba oil, and trehalose protect against dehydration and breakage.

2. KeraBoost Fixing Serum (Product 2)
• Second stage of the procedure.
• Fixes the new shape and direction of hairs.
• Can be used alone or combined with KeraTint Lash Tint (lifting + tinting in one step).
• Vegan protein and glycerin provide conditioning care.

3. KeraTint Lash Tint
• Can be used at the second stage with KeraBoost or on its own.
• Provides quick and intense lash coloring.
• Allows combining lifting and tinting, significantly reducing procedure time.
• Vegan protein and sunflower seed extract deliver extra care.

4. KeraCare Care Serum (Product 3)
• Final, third stage.
• Intensively nourishes, moisturizes, and restores lashes and brows.
• Protein complex (vegan & wheat) strengthens hairs.
• Ceramides restore the hydrolipid balance.
• Trehalose and jojoba oil provide protective and antioxidant effects.
• Can be used to minimize brow hair darkening before tinting.

Shelf life: 24 months
Shelf life after opening: 6 months

LASH LIFT PROCEDURE STEPS

1) Analyse the eyelash hair condition of a client

Specify the processing time and type of the solution – KeraSoft Lash Lifting Serum Step 1 according to the instructions below:

1st type: the eyelash hairs are thick and straight, not having undergone chemical procedures earlier (eyelash lifting, tinting or bleaching procedures) ‒ KeraSoft Lash Lifting Serum Step 1, processing time is 8‒10 minutes;

2nd type: the eyelash hairs are of medium thickness or thin, not having undergone chemical procedures earlier (eyelash lifting, tinting or bleaching procedures) ‒ KeraSoft Lash Lifting Serum Step 1, processing time is 5–7 minutes;

NOTE! The maximum processing time of nKeraSoft Lash Lifting Serum Step 1 is 10 minutes.

NOTE! The room air temperature directly influences the working speed of the solution. The higher the temperature, the less the reaction time.

The processing time of KeraBoost Lash and Brow Fixing Serum Step 2 is 7 minutes and does not depend on the hair condition of a client and the processing time of KeraSoft Lash Lifting Serum Step 1.

2) Prepare the eyelashes for the lash lift procedure

2.1 Use «ÉLAN DETOX-MOUSSE» for eyelash hair cleansing before the lash lifting procedure. Remove the foam using a cotton pad moistened with water.

2.2 Fix a silicone pad of the appropriate size on the upper eyelid.

2.3 Spread and fix the eyelashes on the silicone pad using the fixing gel by TM ELAN professional line and an applicator.

3) Create the eyelash curl – KeraSoft Lash Lifting Serum Step 1

3.1 Apply KeraSoft Step 1 to the area of curl forming. The processing time is 5‒10 minutes.

NOTE! Processing time and solution type (KeraSoft Lash Lifting Serum Step 1) should comply with that indicated for the selected eyelash hair type.

3.2 Remove the excess solution with a dry make-up brush in the eyelash hair growth direction first, then use a microbrush or a cotton pad moistened with water.

4) Fix the eyelash hair direction – KeraBoost Lash and Brow Fixing Serum Step 2

4.1 Fix the eyelash hair direction without tinting

4.1.1. Apply a thick layer of KeraBoost Lash and Brow Fixing Serum Step 2 to the entire eyelash area. The processing time is 7 minutes.

4.1.2 Remove the excess solution with a dry make-up brush in the eyelash hair growth direction first, then with a microbrush or a cotton pad moistened with water or «ÉLAN DETOX-MOUSSE». If using «ÉLAN DETOX-MOUSSE», remove the foam using a cotton pad moistened with water.

4.2 Fix the eyelash hair direction with tinting on the pad – KeraBoost Lash and Brow Fixing Serum Step 2 + KeraTint Lash Tint

4.2.1 Mix KeraTint Lash Tint and KeraBoost Lash and Brow Fixing Serum Step 2 in the ratio 1:2 in a non-metallic bowl.

NOTE! The product colour in the bottle can vary from light brown to black as a result of the product’s contact with air after the package opening. This is normal for the ingredients in the tint composition and does not influence the lash tinting result.

4.2.2 Apply a thick layer of the mixture to the entire eyelash area. The processing time is 7 minutes.

4.2.3 Remove the excess solution with a dry make-up brush in the eyelash hair growth direction first, then with a microbrush or a cotton pad moistened with water or «ÉLAN DETOX-MOUSSE». If using «ÉLAN DETOX-MOUSSE», remove the foam using a cotton pad moistened with water.

4.2.4 Use ELAN COLOUR FIX to secure the obtained result.

5) Eyelash hair care – KeraCare Lash and Brow Caring Serum Step 3

5.1 After using KeraBoost Lash and Brow Fixing Serum Step 2 or the mixture of KeraTint Lash Tint + Lash and Brow Fixing Serum Step 2, apply a small amount of KeraCare Lash and Brow Caring Serum Step 3 to the cleansed eyelashes and spread evenly. Leave until fully absorbed. Do not rinse off.

LASH LIFT POST-PROCEDURE RECOMMENDATIONS

! It is highly recommended to avoid saunas, solariums and any mechanical damage to the created eyelash curl (e.g. sleeping face down on the pillow), do not brush the eyelashes for 24 hours after the procedure.

! It is highly recommended to avoid using aggressive cosmetic products and undergoing aggressive cosmetic procedures (scrubs, face peels, alcohol-based lotions, laser treatments) for 48 hours after the procedure.

LASH LIFT PROCEDURE CONTRAINDICATIONS

The absolute restrictions to the lash lift procedure are as follows: an individual sensitivity to the solution ingredients, any skin damage in the eye area, redness, a facial rash of any aetiology, allergic reactions, visiting a solarium or undergoing laser treatments for 24 hours before the procedure.

WARNING

KeraSoft contains thioglycolate and ammonia, KeraBoost contains hydrogen peroxide, KeraTint contains phenylenediamine, phenylenediamine (toluoldiamines), resorcinol. Products can cause allergic reactions. It is necessary to do the allergy skin test before use: apply 2 drops of each solution to a small area of inner elbow skin 48 hours before use. If there is no redness, inflammation or rash, you can perform the procedure.

For professional use only. Read and follow application instruction. Wear suitable gloves. For external use only. Do not use metal objects while working with the products. Avoid contact with eyes. Rinse eyes immediately if products comes into contact with them. In case of an allergic reaction, consult a dermatologist.

KeraTint is not intended for use on persons under the age of 16. Temporary «black henna» tattoos may increase your risk of allergy. Do not tint your eyelashes if:

– you have a rash on your face or sensitive, irritated and damaged scalp;

– you have ever experienced any reaction after colouring your hair or eyelashes;

– you have experienced a reaction to a temporary «black henna» tattoo in the past.

KeraSoft Step 1: AQUA, THIOGLYCOLIC ACID, CETEARYL ALCOHOL, ETHANOLAMINE, AMMONIUM HYDROXIDE, CYSTEAMINE HCL, PROPYLENE GLYCOL, PARAFFINUM LIQUIDUM, DIMETHYLAMINO METHYLPROPANOL, ETHYLHEXYL STEARATE, SODIUM ERYTHORBATE, ISOPROPYL PALMITATE, CETEARETH-20, ETHYLHEXYLGLYCERIN, TREHALOSE, SIMMONDSIA CHINENSIS SEED OIL, CETRIMONIUM CHLORIDE, DISODIUM EDTA, POLYQUATERNIUM-22, HYDROLYZED VEGETABLE PROTEIN, PHENOXYETHANOL, SODIUM BENZOATE, BENZYL ALCOHOL, DEHYDROACETIC ACID, CITRIC ACID, PARFUM, LIMONENE, LINALOOL.

KeraBoost Step 2: AQUA, CETEARYL ALCOHOL, GLYCERIN, HYDROGEN PEROXIDE, CETEARETH-20, ISOPROPYL PALMITATE, PHOSPHORIC ACID, CETRIMONIUM CHLORIDE, CITRIC ACID, ETHYLHEXYL STEARATE, DISODIUM EDTA, TETRASODIUM PYROPHOSPHATE, SODIUM STANNATE, SODIUM CARBONATE, SODIUM HYDROXIDE, HYDROLYZED VEGETABLE PROTEIN, BENZYL ALCOHOL, DEHYDROACETIC ACID.

KeraCare Step 3: AQUA, CETEARYL ALCOHOL, GLYCERIN, HYDROGENATED POLYISOBUTENE, DICAPRYLYL ETHER, CETYL ESTERS, TREHALOSE, PHENOXYETHANOL, ETHYLHEXYLGLYCERIN, GLUCOSYL CERAMIDE, PHOSPHOLIPIDS, ACRYLATES/C10-30 ALKYL ACRYLATE CROSSPOLYMER, CHOLESTEROL, SODIUM HYDROXIDE, CETEARETH-20, SIMMONDSIA CHINENSIS SEED OIL, HYDROLYZED WHEAT PROTEIN, HYDROXYETHYLCELLULOSE, HYDROLYZED VEGETABLE PROTEIN, TOCOPHEROL, POTASSIUM SORBATE, BENZYL ALCOHOL, DEHYDROACETIC ACID, SODIUM CHLORIDE, SODIUM SULFATE, PARFUM, CITRIC ACID, CI 61570, CI 47005.